TELEPHONE EXCHANGE.
NEAV SYSTEM STARTS TO-DAY
The Postmaster supplies tlio following information regarding the new multiple swdtcliboard which has been installed at tlie' telephone exchange : 1. Subscriber will ring and then place receiver to the ear and listen. 2. Exchange attendant will answer, “Number, please.” 3. Subscriber will give number.
4. Exchange will "ring up” the required number, subscriber continuing to listen with receiver. 5. When attention obtained subscriber will be in a position to immediately converse. 6. After conversation concluded “ring off.”
7. If tbo number is engaged the attendant replies “engaged.” 8. If the exchange fails to obtain number required tlie subscriber will be so informed.
9. Exchange may deem it necessary to inquire if “still engaged” whilst wire occupied, subscriber will promptly reply “Engaged.” 10. Subscribers are requested to refrain from conversing with exchange attendants beyond giving the necessary instructions for connections. •
11. Complaints from subscribers will be attended to by the officer in charge of the exchange, to whom they should he made, and the exact time should bo stated fti connection wth such matters.
Permanent link to this item
Hononga pūmau ki tēnei tūemi
https://paperspast.natlib.govt.nz/newspapers/GIST19070930.2.16
Bibliographic details
Ngā taipitopito pukapuka
Gisborne Times, Volume XXV, Issue 2198, 30 September 1907, Page 2
Word count
Tapeke kupu
179TELEPHONE EXCHANGE. Gisborne Times, Volume XXV, Issue 2198, 30 September 1907, Page 2
Using this item
Te whakamahi i tēnei tūemi
The Gisborne Herald Company is the copyright owner for the Gisborne Times. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (CC BY-NC-SA 4.0). This newspaper is not available for commercial use without the consent of the Gisborne Herald Company. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Log in